Bosch D720 Guide d'installation télécharger pdf (Page 24)

D9412GV3/D7412GV3 | Operation and Installation Guide | 5.0 Power Supply

24 Bosch Security Systems, Inc. | 2/10 | F01U143070-01

2. Locate the red and black leads supplied in the

literature pack.

3. Connect the black battery lead to Terminal 4, and

then to the negative (-) side of the battery.

4. Connect the red battery lead to Terminal 5, and

then to the positive (+) side of the battery.

Warning: High current arcs are possible.

The positive (red) battery lead and

Terminal 5 can create high current arcs if

shorted to other terminals or the

enclosure. Use caution when working

with the positive lead and Terminal 5.

Always disconnect the positive (red) lead

from the battery before removing it from

Terminal 5.

Caution: The battery terminals and wire

are not power limited. A 6.4 mm (0.250

in.) space must be maintained between

the battery terminals, battery wiring, and

all other wiring. Battery wiring cannot

share the same conduit, conduit fittings,

or conduit knock-outs with other wiring.

Refer to Error! Reference source not

found..

Figure 7: Battery Terminals

1 - Battery terminals. Terminal 5 is non-power

limiting.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 75 76

Pas de commentaire

Bosch D720 Guide d'installation Page 24