Bosch DiBos Micro Guide d'installation télécharger pdf (Page 74)

74 en | Default Configuration DiBos/DiBos Micro

F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH

6.5.2 Configuring Relay Outputs

Inputs and outputs menu > Relay tab

The number of relay outputs depends on the model. In DiBos there are a maximum of 16 relay

outputs available and in DiBos micro, 12 relay outputs. The relays can be activated locally,

from a remote station, via a job or via a browser.

1 Relay Click the tab.

2 Type Click the down arrow in the column and select

whether an output is to be activated or not.

The relay output is activated.

A malfunction relay can be connected to the relay

output.

Note:

Only one malfunction relay can be connected. The

events that trigger the malfunction relay can be found

in the Connecting a Malfunction Relay chapter in the

installation handbook

The relay output is not activated.

3 Name Place the cursor in the column and enter the name.

4 Save The entries are saved.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 157 158

Pas de commentaire

Bosch DiBos Micro Guide d'installation Page 74