Bosch DiBos Micro Guide d'installation télécharger pdf (Page 24)

24 en | Device Connections DiBos/DiBos Micro

F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH

3.1.4 I/O Card for DiBos

The following can be set for the I/O card:

– the relay outputs (NO = normally open, NC = normally closed)

– the malfunction outputs (NO = normally open, NC = normally closed)

1 Relay outputs:

The setting is printed on the PCB.

Relay outputs 1–8: open (NO = normally open)

Relay outputs 9–16: closed (NC = normally closed)

2 Malfunction output:

The setting is printed on the PCB.

Bridge position up:

Open (MAL NO = malfunction normally open)

Bridge position down:

Closed (MAL NC = malfunction normally closed)

NOTICE!

The I/O card must be removed to change the bridge settings.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 157 158

Pas de commentaire

Bosch DiBos Micro Guide d'installation Page 24