Bosch FW5.50 Manuel d'utilisateur télécharger pdf (Page 85)

Camera Browser Interface Network | en 85

Bosch Security Systems Software manual AM18-Q0611 | v5.50 | 2012.03

2. Enter the Password that the Radius server expects from

the camera.

14.2.5 RTSP port

If necessary, select a different port for the exchange of the

RTSP data from the list. The standard RTSP port is 554. Select

Off to deactivate the RTSP function.

14.2.6 UPnP

Select On to activate UPnP communication. Select Off to

deactivate it.

When UPnP is activated the camera reacts to requests from the

network and is registered automatically as a new network

device on the inquiring computers.

Note:

To use the UPnP function on a computer with Windows XP or

Windows Vista, the Universal Plug and Play Device Host and the

SSDP Discovery services must be activated

This function should not be used in large installations due to

the large number of registration notifications.

14.2.7 TCP metadata input

The device can receive data from an external TCP sender, for

example an ATM or POS device, and store it as metadata.

Select the port for TCP communication. Select Off to

deactivate the function. Enter a valid Sender IP address.

14.2.8 Quality of Service

The priority of the different data channels can be set by

defining the DiffServ Code Point (DSCP). Enter a number

between 0 and 252 as a multiple of four. For alarm video you

can set a higher priority than for regular video and you can

define a Post Alarm Time over which this priority is maintained.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 93 94

Pas de commentaire

Bosch FW5.50 Manuel d'utilisateur Page 85