Bosch APC-AMC2-4WCF Manuel d'installation Page 51

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 60
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 50
AMC2 4W Operating | en 51
Bosch Security Systems Installation manual F.01U.024.965 | V.4 | 2006.09
Fig. 6.2 Restarting the AMC2 4W with the provided screw driver
6.3.2 Resetting the Network Configurations
1. Reset the AMC2 4W as described above (in download pro-
gram).
2. Open the upper case of the AMC2 4W as described in
Section 5.3 Opening the AMC2 4W Case.
3. Set all six DIL switches of the RS-485 selector to ON
4. Press the tamper switch on the upper left side of the board
The AMC2 4W will now have the following network configura-
tion:
DHCP = 0
IP = 127.0.0.1
Vue de la page 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 59 60

Commentaires sur ces manuels

Pas de commentaire