Bosch APC-AMC2-4WCF Manuel d'installation télécharger pdf (Page 28)

28 en | Installing AMC2 4W

F.01U.024.965 | V.4 | 2006.09 Installation manual Bosch Security Systems

5.4.3 Grounding and Shielding the Extension Interface

Fig. 5.5 Location of ground jumper bottom side

Jumper B connects the internal ground of the AMC2 4W to the

RS-485 ground of the slave interface. Jumper B shall only be

set (B2) if the AMC2 4W powers all other peripheral devices

which are directly connected to the AMC2 4W.

5.5 Connecting Power Supply

Connect the power supply to the 7-pin pluggable screw connec-

tor labeled with POWER on the upper case.

NOTE!

A complete connection diagram of the power supply connector

is shown in Figure 7.6.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 59 60

Pas de commentaire

Bosch APC-AMC2-4WCF Manuel d'installation Page 28