Bosch VG4-100 Series Manuel d'installation télécharger pdf (Page 28)

28 en | Installing the Pendant Arm Wall, Corner, and Mast (Pole) Mounts VG4 Modular Camera Series

F.01U.162.025 | 6.0 | 2010.03 Installation Manual Bosch Security Systems, Inc.

d. Once the Mounting Plate (item 1, below) is attached to the Mast Plate (item 2),

connect the right angle conduit (item 3) to the Mounting Plate through the empty

conduit hole as shown below:

3. Ensure that the mounting plate is secure.

2.8.1 Attach the Pendant Arm to the Mounting Plate

The bottom hinge pin of the Pendant Arm is provided with a Hinge Pin Stop to hold the hinge

open while attaching the arm to the Mounting Plate.

1. Compress the bottom hinge pin by pushing the pin lever downward and rotating it

behind the Hinge Pin Stop.

Figure 2.12 Connect Pendant Arm to Mounting Plate

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 107 108

Pas de commentaire

Bosch VG4-100 Series Manuel d'installation Page 28