Bosch K2200 Series Guide d'installation Page 25

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 60
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 24
K2200 Series | Installation Guide | 5.0 Installation Details EN | 25
Bosch Security Systems | 7/03 | 17375 1.3 / 46513C
Figure 12: Metal Case
5.3.2 Faceplate
The faceplate is secured by two tabs that fit into slots
in the power supply on the left-hand side of the
baseplate and by two spring clips on the right-hand
side that attach to the baseplate. The ribbon
connector should be plugged into the socket on the
circuit board at the top right of the board.
The door controller fits in the metal case using two
slots that fit over tabs on the back of the case. You
should ease the tabs on the case forward slightly to
make locating the door controller easier. The base
plate should then be secured using the single tab at
the bottom of the baseplate using the self-tapping
screw supplied.
5.3.3 Fitting Direct to a Flat Surface
You may wish to fit the door controller in an
enclosure or cabinet other than one of the standard
metal cases.
Figure 13 indicates the position of screw slots and
cable entry holes on the door controller.
Vue de la page 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 59 60

Commentaires sur ces manuels

Pas de commentaire