Bosch K2200 Series Guide d'installation télécharger pdf (Page 21)

K2200 Series | Installation Guide | 5.0 Installation Details EN | 21

Bosch Security Systems | 7/03 | 17375 1.3 / 46513C

5.0 Installation Details

This section is takes you through the various steps in

fitting the door controllers. It contains:

1. A brief description of each controller - what it

looks like, dimensions, etc.

2. Details on how to fit and test the hardware -

controllers, readers, etc.

5.1 Readykey K2200 Series Controllers

- Description

5.1.1 Multi-Function Door Controllers (K2200

and K1200)

Physically, all the door controllers look alike with the

main difference being in the number of reader

channels and AEMs that can be supported.

The unit comes complete with a power supply. It

can also be ordered with or without a faceplate.

There are 2 types of faceplates available, depending

on the readers that will be used. Order a K2200,

which comes with the K2108 faceplate, (has the

Traditional Readykey Reader built in). Order the

K2200-KP, which comes with the K3108 faceplate

(has the KeyPAC reader built in). Order a K2200-

LF, for the controller only, Less Faceplate. It is

required that at least one faceplate is used per system.

The following diagrams show the Readykey K2200

on a skirt with and without a faceplate.

Note:

All dimensions of the skirt and metal case are given in

the section dealing with installing the controller.

Figure 9: Readykey K2200 Door Controller with Faceplate Fitted

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 59 60

Pas de commentaire

Bosch K2200 Series Guide d'installation Page 21