Bosch ISW-BIT1-HAX WLSN INSTALLATION Spécifications télécharger pdf (Page 54)

wLSN | Reference Guide | 14.0 wLSN Glassbreak Detector

54 Bosch Security Systems, Inc. | 3/07 | F01U009440-01

6. Observe the green event LED (Item 6, Figure 19 on page 51)

for approximately 1 min. If the green LED flashes, relocate

the unit or reduce the sensitivity by adjusting the sensitivity

switch.

7. Repeat Steps 3 through 6 until you achieve the best

sensitivity level.

8. After setting the sensitivity, slide the LED enable switch

(Item 8, Figure 19 on page 51) to the OFF position.

14.3 Testing

Test the detector at least once each year. Test the detector with

the 13-332 Sound Sensor Tester.

Figure 21: 13-332 Sound Sensor Tester

ACTIVATE TEST FLEX MAN

2 3

13-332

1 - Activate/Test switch

2 - Start button

3 - Flex/Man switch

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60

Pas de commentaire

Bosch ISW-BIT1-HAX WLSN INSTALLATION Spécifications Page 54