Bosch KDD74AL20N Manuel d'installation télécharger pdf (Page 11)

en

11

Switching on the

appliance

The appliance starts to cool after it is

connected to the power supply. The

lighting is switched on when the door is

opened.

An acoustic warning tone sounds. The

"alarm" button can be used to switch off

the audible warning signal.

The factory has recommended and set

the following temperatures:

■ Fridge compartment: +4 °C

■ Freezer compartment: -18 °C.

Notes on using the appliance

■ After switching on the appliance, it

may be several hours before the set

temperatures are reached.

■ Thanks to the fully automatic no-frost

system, the freezer compartment

remains ice-free. There is no longer

any need to defrost it.

■ The front side of the housing is slightly

heated. This prevents condensation

from forming around the door seal.

■ If the freezer compartment drawer

cannot be opened again soon after

being closed, wait for a moment until

the negative pressure has cleared.

Setting the

temperature

Figure "

Cooling compartment

The temperature can be set from +2 °C

up to +8 °C.

Press button 4, "fridge/super", repeatedly

until display panel 5 displays the

required refrigerator compartment

temperature.

The last set value is saved.

Notes

■ Do not store perishable foods at

temperatures higher than +4 °C.

■ For short-term storage of food, a

higher temperature can be set

(energy-saving operation).

■ When frequently opening the door and

placing large quantities of food in the

cooling compartment, a lower

temperature should be set.

Freezer compartment

The temperature can be set from -15 °C

up to -22 °C.

Press the "freezer/super" button 1

repeatedly until the display panel 7

shows that the required freezer

compartment temperature is set.

The last set value is saved.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 108 109

Commentaires sur ces manuels

Pas de commentaire