Bosch SHPM98W75N Manuel d'installation télécharger pdf (Page 15)

CLICK

Adhesive

backed

cord clip

Leg Adjuster

(127 mm

)

Mount the dishwasher electrical supply junction box (A) and dedicated

receptacle in an accessible cabinet adjacent to the dishwasher (do not

mount the junction box or receptacle behind the dishwasher).

Note: screws are not provided for mounting electrical supply junction box.

Check all electrical connections to ensure they are secure and then reattach

the junction box cover.

Place adhesive backed cord clip (provided in the installation kit) 5 inches from

leg adjuster as shown in the gure above and route power cord through the clip.

Note: The length of cord measured from the plastic back strap to the receptacle

should be ≤ 47.25" (1,200 mm).

Plug the end of the supply cord into the back of the dishwasher as shown

until it clicks.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 95 96

Pas de commentaire

Bosch SHPM98W75N Manuel d'installation Page 15