Bosch MUM9AX5S00 Manuel d'instructions télécharger pdf (Page 33)

33

en

Using accessories

Weighing ingredients

X Image sequence K

1. Prepare the base unit.

2. Plug the mains plug into the mains.

“OptiMUM” appears on the display.

3. Press button C and don't touch the

appliance again. “–––––” (tare)

appears on the display for a brief

moment.

4. “0g” or “0.00lb” appears on the display

(depending on the setting). The scales

are ready.

5. Add ingredients. The scales display the

weight.

6. To weigh additional ingredients

separately: press button C and do not

touch the appliance again. “–––––”

(tare) appears on the display for a brief

moment.

7. “0g” or “0.00lb” appears on the display

(depending on the setting). The scales

are ready.

8. Add all desired ingredients and weigh

them in this manner.

Process the weighed ingredients. X “Using

without additional functions” see page 29

Note: If button C is pressed while

processing food, “FOR SCALE TURN SWITCH

TO 0” appears on the display.

Pre-setting the weight

X Image sequence L

1. Press button C and don't touch the

appliance again. “–––––” (tare)

appears on the display for a brief

moment.

2. “0g” or “0lb” appears on the display

(depending on the setting). The scales

are ready.

3. Press button +. “50 g” or “XY lb”

appears on the display (depending on

the setting).

4. Set the desired weight using button +

or - (max. 5000 g).

5. Add ingredients. The quantity still

missing is shown on the display, e.g.

“65g”.

6. From “40g”, a recurring acoustic signal

sounds. The lower the remaining

quantity, the faster the acoustic signal

sounds.

7. At “0g” (meaning that the pre-set

quantity has been added), the acoustic

signal stops.

8. If the pre-set quantity has been

exceeded, the acoustic signal will sound

continuously. The additional weight is

indicated with a minus symbol. If the

quantity is exceeded by 25 g, “–25g” is

displayed.

Using accessories

Your food processor oers a number

of accessories that signicantly extend

its functions. Depending on the model,

certain accessories are already included

in the scope of supply. If an accessory

is not included, it can be purchased

via trade stockists or customer service.

X “Accessories” see page 38

Preparation for accessories

The base unit requires dierent preparation

depending on the accessory.

■ Place the base unit on a smooth, clean

and stable surface.

■ Pull the power cord out to the required

length.

■ Prepare the base unit as shown

depending on the accessory.

X Fig. M

1. Preparation for tools.

2. Preparation for accessories on black

drive with bevel gear and accessory

used in place of the bowl.

3. Preparation for accessory on red drive,

for example blender or multi-chopper.

4. Preparation for accessory on yellow

drive without outlet opening for food,

e.g. multi-blender or citrus press.

5. Preparation for accessory on yellow

drive with outlet opening for food, e.g.

continuous-feed shredder.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 177 178

Commentaires sur ces manuels

Pas de commentaire