Bosch MUM9AX5S00 Manuel d'instructions Page 28

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 178
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 27
28
en Preparation
Cable storage
compartment
X Fig. A
Depending on the model: The
appliance is equipped with a cable storage
compartment. The length of the power cord
can be adjusted as required by pulling it out
or pushing it back.
Safety systems
The appliance features various safety
systems. X “Safety systems” see
page 36
Preparation
Place the base unit on a smooth, clean
and stable surface.
Pull the power cord out to the required
length.
Press the release button and raise
the swivel arm to the stop.
Place the cover with the lling shaft at
the front on the main drive.
Insert the bowl. When doing so, use the
recesses on the base unit.
Turn the bowl anticlockwise until it locks
into place.
The base unit is prepared for further use.
Basic settings
Setting the display language
Press the release button and push the
swivel arm down until it locks into place.
Plug the mains plug into the mains.
“OptiMUM” appears on the display.
Note: If the appliance is not used or
operated within a certain period, the display
will slowly fade and switch to standby
mode. “OptiMUM” will appear once again
when any button is touched.
Press and hold buttons A and + at the
same time until the conguration menu
is opened. The language selection is
shown.
Press the button + or - repeatedly
until the desired language is displayed.
LANGUAGE
ENGLISH
Press and hold buttons A and +
simultaneously until “SAVED ENGLISH”
appears on the display. The language
selection is saved.
SAVED
ENGLISH
If no further setting is made, “OptiMUM”
appears again on the display.
Additional settings
Press and hold buttons A and + at the
same time until the conguration menu
is opened.
The following settings appear in
sequence each time button A is briey
pressed:
LANGUAGE
Language in which the display texts are
displayed.
SOUND
Volume of the acoustic signals – setting
in 6 levels from o to loud.
BRIGHTNESS
Brightness of the display – setting in
6 levels from dark to bright.
UNITS (for models with scales)
Unit of display for the scales – grams (g)
or pounds (lb).
The current setting is changed using the
button + or -.
Press and hold buttons A and +
simultaneously until “SAVED” appears
on the display. The changed settings are
saved.
Vue de la page 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 177 178

Commentaires sur ces manuels

Pas de commentaire