Bosch DSDA ISCSI DISK ARRAY SERIES DSA-N2B20 Guide d'installation télécharger pdf (Page 30)

28 en | Monitoring and Maintenance DSDA iSCSI Disk Array Series

V 1 | 2008.08 Installation Guide Bosch Security Systems

There are four LEDs on the power supply unit on the rear side of each shelf.

If either the Fan LED or the Power LED are lit amber, the power supply unit must be replaced.

At the front side of each disk drive, there are two LEDs.

–If no LED is lit, the drive is not recognized. Reinsert the drive.

– If one LED is lit amber, a fault is indicated. The drive must be replaced.

7.4 Software Update

NOTICE!

Only Bosch certified software can be used.

NOTICE!

To update the software, the system must reboot. During this process, no data can be written

to the system.

NOTICE!

If you are not using VRM, you need a program that functions as a Web server.

For example, you can use AIDeX Mini-Webserver which can be downloaded from

http://www.aidex.de/software/webserver/.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 39 40

Pas de commentaire

Bosch DSDA ISCSI DISK ARRAY SERIES DSA-N2B20 Guide d'installation Page 30