Bosch DS7445i Guide de l'utilisateur télécharger pdf (Page 9)

DS7240/DS7220 User's Guide Copyright  2002 Detection Systems, Inc. P/N: 49211C Page 9

PART II: KEYPAD USER’S GUIDE: DS7447i LCD KEYPAD

If your keypad displays a message that indicates the

system is not ready to turn on (for example, “Not

Ready), check all doors and windows to see if any are

open, or if someone or something is in front of a

motion detector. You may also press [#] + [0] to see

the faulted zone.

If all protected doors and windows are closed and no

motion detectors are blocked and the keypad still

displays “Not Ready,” contact your Security Company

for assistance.

Procedure

In the example below, Exit Delay is 60 seconds.

Leave before Exit Delay expires. Leaving after

Exit Delay expires causes an alarm event.

1. Make sure that all zones are normal (not faulted).

If your system has a faulted zone (door or

window open), you can either close it or bypass

it. See “Bypass Zones” on page 13.

2. Enter a valid user PIN.

3. Press the [On] key or enter [#] + [1].

Exit Delay time now begins. The Armed LED

turns on. Exit the building now.

60 seconds to

All On

Enter your PIN to stop the system from turning on

during Exit Delay.

Press the [Bypass] key to bypass zones. You can

turn the system All On with No entry by pressing

the [No Entry] key. You can also turn the system

Perimeter Only On by pressing the [Perimeter

Only] key. The system prompts you through this

procedure:

To bypass zones

Press Bypass

For no entry

Press No Entry

For Perimeter On

Press Perimeter Only

During the last 10 seconds of Exit Delay, the

keypad allows for a “last chance” response to

disarm the system. During this time, the keypad

emits a double tone every second. The system

then turns All On. The Armed LED remains on.

Smiths Residence

All On

4. To turn the system off, enter a valid PIN.

4.5 Turn the System On Perimeter Only

Exit Delay Time (to be filled in by your Security

Company):

You have __________ seconds to exit the premises.

Key Sequence: [Perimeter Only] Key or [#] + [2]

Description

Perimeter Only turns on only part of your system,

leaving the rest of the system turned off.

If your keypad shows “OK for Perimeter” or “OK for All

On,” this means that all of the zones that turn on for

Perimeter Only are normal (for example, all protected

doors and windows are closed).

Smiths Residence

OK for Perimeter

Once you press the [Perimeter Only] key, Exit Delay

begins. Use Perimeter Only when you want part of

your system turned on. For example, use Perimeter

Only if you plan to stay inside the premises and you

only want to protect the perimeter doors, or you are

leaving and you wish to allow a pet to move freely

about inside without causing an alarm.

Procedure

1. Make sure that all Perimeter Only zones are

normal (not faulted). If your system has faulted

zones, return them to normal or bypass them.

2. Enter a valid user PIN.

3. Press the [Perimeter Only] key or enter [#] + [2].

Exit Delay time begins.

The Armed LED turns on. The keypad display

scrolls through the following:

60 seconds to

Perimeter On.

To bypass Zones

Press Bypass.

For no entry

Press No Entry.

For All On

Press On.

48 seconds to

Perimeter On.

Enter your PIN to stop the system from turning on

during Exit Delay. You can turn the system on

Perimeter Only with No Entry by pressing the [No

Entry] key, or you may bypass zones by pressing

the [Bypass] key.

During the last 10 seconds of Exit Delay, the

keypad allows for a “last chance” response to

disarm the system. During this time, the keypad

emits a double tone every second. The system

then turns Perimeter Only On. The Armed LED

remains on.

4. To turn the system off, enter a valid PIN.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 53 54

Commentaires sur ces manuels

Pas de commentaire

Bosch DS7445i Guide de l'utilisateur Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Bosch DS7445i