Bosch DS7400XiV4-EXP Manuel d'utilisateur Page 25
- Page / 40
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
DS7400XiV4-EXP | User Guide | 9.0 Error Displays EN | 25
Bosch Security Systems | 6/05 | 4998154961B
9.0 Error Displays
You can read error displays only when the control panel is disarmed. Some control panel errors, such as battery
trouble and any RF troubles, cause the keypad sounders to beep every 10 seconds.
You can silence the keypad sounders for 4 hours by entering [PIN][Off].
The sounders continue to sound until the problem is fixed.
Clear the error display as advised by your installing company, or if you are certain the problem is
remedied.
Table 23: Error Displays
Error/Warning Messages
LED Keypad Text Keypad Meaning
Power Light
(green) flashing
Control Trouble
Enter [#][8][7]
There is an Error Message. To display the message, enter [PIN][#][8][7].
LED 1 on AC Power Failure There is a power failure and the control panel is operating on backup battery power.
LED 2 on Battery Trouble * If there was a power failure, wait at least two hours for the battery to recharge, then
enter [PIN][System Reset] to perform a battery test.
LED 3 on Communicator Err ** The control panel failed to communicate with the central station.
LED 4 on System Fault
Internal error in the control circuitry or optional circuitry. Refer to Section 9.1
System Faults.
LED 5 on Keypad Fault One of the keypads is not responding to the control panel.
LED 6 on Keypad Tamper One of the keypad housings was opened.
LED 7 on Multiplex Bus The multiplex bus is defective or is shorted.
LED 8 on Aux. Power Fault The auxiliary power is shorted.
Zone Trouble One of the zones is not responding to the control panel. This might also be
displayed during power-up; if this occurs, ignore the message.
RF Indicates a problem with an RF (wireless) zone.
Dirty Chamber One of the multiplex smoke detectors failed the sensitivity test and might require
cleaning or replacement. Clear the keypad beep by entering [PIN][Off]
* The Battery Trouble message is cleared only by the [System
Reset] command or another Automatic Battery Test, even
after the problem is remedied.
** The Communicator Error message is cleared only by the
[System Reset] command or the next successful Automatic
System Off Normal report, even after the problem is
remedied.
- DS7400XiV4-EXP 1
- Contents 2
- 1.0 System Overview 3
- 3.0 Understanding Areas 4
- (Partitions) 4
- LED Keypads 5
- 5.0 Understanding the 6
- RF Keypad and Keyfobs 6
- 6.0 Day to Day Operations 7
- 6.2 Optional Operations 13
- 7.0 Emergency Procedures 19
- 7.8 Fire Safety 20
- * – Smoke Detector 20
- Silencing Alarms 21
- 8.3 Changing a PIN 23
- 8.1 General Information 23
- 8.2 Removing a PIN 23
- 8.4 PIN Authority Levels 24
- 9.0 Error Displays 25
- 9.1 System Faults 26
- 10.0 Testing Your System 27
- 10.2 Battery Tests 28
- 10.3 Communicator Test 28
- 10.4 Fire Walk Test 29
- 10.5 Event History Readback 30
- 11.1 General Information 31
- 11.2 Master Keypad Displays 31
- 11.3 Single Partition Mode 32
- 12.0 Glossary 34
- 13.0 Quick Reference Guide 35
- Bosch Security Systems 40
Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Bosch DS7400XiV4-EXP
(174 pages)
Systèmes de contrôle d'accès de sécurité Bosch ISW-BIT1-HAX WLSN INSTALLATION Spécifications
(60 pages)
(60 pages)
Systèmes de contrôle d'accès de sécurité Bosch REG Sentry Access Control Manuel d'instructions
(18 pages)
(18 pages)
Philips CD6551B22 manuali
Manuali dei proprietari e guide per l'utente per Lettori DVD Philips CD6551B22.
We fornisce manuali pdf Philips CD6551B22 per scaricare gratuitamente in base al tipo di documento:
Commentaires sur ces manuels