Bosch DS484Q Spécifications télécharger pdf (Page 16)

DS484Q/DS486Q | Installation Instructions | 5.0 Walk Test

16 Bosch Security Systems, Inc. | 7/05 | 4998138530F

5.0 Walk Test

Walk across the beam path directly in front of one of the detectors. The ALARM LED should activate. If not, the

beam interrupt time is set too low or the alignment is not correct.

Walk across the beam path in several locations between the detectors (Figure 24).Each time you cross the beam

path, the ALARM LED should activate. If not, the beam interrupt time is set too low or the alignment is not

correct.

Figure 24: Walk Test Pattern

1 - Receiver

2 - Transmitter

3 - Beam path

4 - Crossing the beam path

Inspect the system and perform a walk test at least once a year.

1 2 ... 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Bosch DS484Q Spécifications Page 16