Bosch D9000, G Guide de l'utilisateur télécharger pdf (Page 39)

 Galaxy Interface Manual for Bosch G-series Alarm Panels 

Page 39 of 39

8.2 Assigning Alarm Panel User Codes to Cardholders

System Galaxy allows the operator to manage user codes for the Cardholder. This is an administrative

feature and only one code per cardholder can be configured. To set the user codes see section 15.1.

The Alarm Panel User Codes tab

in Cardholder screen allows user to associate an alarm panel user

code with the cardholder. The user codes are added to the System Galaxy database in the Alarm Panel

User Codes Property screen. Once the user code is set up in the SG database it can be picked from the

User ID droplist in the Cardholder screen.

1. Open the Cardholder screen (Configure>Cards>Cardholders)

» or click the Cardholder button on the toolbar

2. Choose the desired Cardholder from the droplist

3. Click the [Edit] button

4. Select the Alarm Panel User tab

5. Choose the desired alarm panel from the droplist

6. Pick the desired passcode from the droplist

IMPORTANT: You should take precautions to hide the user screen from SG Operators that should not

have the level of access to see the passcode.

Cardholder programming screen – Alarm Panel User Codes tab

1 2 ... 34 35 36 37 38 39

Pas de commentaire

Bosch D9000, G Guide de l'utilisateur Page 39