Bosch D9000, G Guide de l'utilisateur télécharger pdf (Page 21)

 Galaxy Interface Manual for Bosch G-series Alarm Panels 

Page 21 of 39

2.6.3 Alarm Panel CCTV Events Settings

Allows operator to set CCTV parameters to be sent to CCTV system.

 Alarm number = must be greater than zero; allows user to set the number to send to

the CCTV service/system. Zero means no alarm message is sent to CCTV system.

 Camera, Monitor, Position, fields allow SG to send commands to CCTV system.

 Manual command = if programmed, the user can send commands from the short

menu in the hardware tree.

 URL = if programmed, can invoke commands at the web site

CCTV Events tab (cropped)

Notethatchangesaresavedwhenthe[Apply]buttonisselected

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 38 39

Pas de commentaire

Bosch D9000, G Guide de l'utilisateur Page 21