Bosch D7212GV2 Guide d'installation télécharger pdf (Page 10)

D7212GV2 | Operation and Installation Guide | 3.0 Overview

10 Bosch Security Systems, Inc. | 2/07 | F01U003805-02

Table 3: Compatible Accessories (continued)

Model Title Fire Intrusion

D1255W Text Keypad (white) X X

D1256 Fire Keypad (Command Center) X

D1257 Fire Alarm Annunciator X

D1260/D1260B

Keypads X X

D1640 16.5 VAC 40 VA Transformer X X

D8004 Transformer Enclosure X X

D8125 POPEX Module X X

D8125MUX Multiplex Bus Interface X X

D8125INV

Wireless Interface Module X

D8128D OctoPOPIT Module X X

D8129 OctoRelay Module X X

D8130 Release Module X X

D8132 Battery Charger Module X X

D9127U/T POPIT Module X X

D9131A Parallel Printer Interface Module X X

ZX776Z PIR Motion Sensor [15 m (50 ft)] with POPIT X

ZX794Z PIR Motion Sensor [24 m (80 ft)] with POPIT X

ZX865

PIR/Microwave Motion Sensor [+1.7°C (+35°F)] with POPIT

ZX938Z PIR Motion Sensor [18 m (60 ft)] with POPIT X

ZX970

PIR/Microwave Motion Sensor [+1.7°C (+35°F)] with POPIT

Version 1.03 or above

The D8125INV was not investigated by UL. Do not use D8125INV in UL Listed installations.

3.3 Features in the D7212GV2

3.3.1 SDI Molex

Connector

Use the SDI Molex Connector to connect easily an

SDI device with the SDI bus, without needing to

disconnect wires connected to the SDI terminals.

Possible applications include:

• Connecting a DX4010i to program the control

panel with Remote Programming Software (RPS)

at the premises

• Connecting a keypad to test the control panel.

Do not connect the D5200 Programmer to

the SDI Molex connector.

3.3.2 Tip and Ring Posts

The tip and ring posts allow connecting a phone or

buttset for the purpose of troubleshooting

communications between the control panel and the

central station. This connection allows monitoring of

the dial tone, handshaking tones from the receiver, and

communications signals.

3.3.3 Super Capacitor

The D7212GV2 Control Panel has a capacitor called

Super Cap. This component preserves the parameters

stored in the control panel’s RAM chip when the

lithium battery is replaced. The Super Cap can retain

voltage for up to 30 minutes after the lithium battery is

removed.

Plan to replace the lithium battery after 3 to 5 years of

continual service.

When replacing the lithium battery, ensure

that you disconnect the primary AC power

and secondary battery power from the

control panel before you remove the old

battery. Then install the new battery and

connect the primary AC and secondary

battery power to the control panel.

3.3.4 Telephone Line Sniff

The D7212GV2 Control Panel monitors the phone line

for the programmed supervision interval before

indicating a phone line trouble. If trouble occurs, refer

to Central Station Communications Symptoms in the

D9412GV2/D7412GV2 Troubleshooting Guide

(P/N: F01U011024).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 59 60

Commentaires sur ces manuels

Pas de commentaire

Bosch D7212GV2 Guide d'installation Page 10

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Bosch D7212GV2