Bosch D220 Guide de l'utilisateur télécharger pdf (Page 18)

Resetting the System

Use this feature to reset the system (including fire points) after an alarm

and to clear alarm memory. Resetting the system takes about 20 seconds.

The All, Part, and point lights go out during reset. If points do not reset,

the OK light continues to blink. Call your alarm company for help.

1. Ensure your system is off (On light is off).

2. Press the [3] key and enter your passcode to begin the reset.

Resetting takes approximately 20 seconds. During reset, the

display shows the following:

3. After the system is reset, the display returns to normal operation.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Pas de commentaire

Bosch D220 Guide de l'utilisateur Page 18