Bosch VOT-320V009L Manuel d'utilisateur télécharger pdf (Page 86)

Doc | V4.6 | 2014.02 Installation and Operating Manual Bosch Sicherheitssysteme GmbH

86 en | Operation

VOT-320



Digital I/O



The alarm icons Input 1 and Input 2 are for information purposes and indicate the status of an

alarm input: When an alarm is triggered, the corresponding icon lights up blue. The camera's

configuration determines whether the alarm is displayed, as well as additional details (see

Section 5.14 Advanced Mode: LIVEPAGE Functions, page 38).



Triggering relay

You can switch connected units using the relays in the VOT-320 (for example lights or door

openers).

To activate this, click the icon for the corresponding relay next to the video image. The

icon will be red when the relay is activated.



System Log / Event Log



The System Log field contains information about the operating status of the VOT-320 and the

connection. You can save these messages automatically in a file (see Section 5.14 Advanced

Mode: LIVEPAGE Functions, page 38).

Events such as the triggering or end of alarms are shown in the Event Log field. You can save

these messages automatically in a file (see Section 5.14 Advanced Mode: LIVEPAGE Functions,

page 38).

1. If you want to delete the entries, click the delete icon in the top right-hand corner of the

relevant field.

2. If you want to view a detailed log, click the icon in the top right-hand corner of the

relevant field. A new window will open.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 115 116

Pas de commentaire

Bosch VOT-320V009L Manuel d'utilisateur Page 86