Bosch D720 Manuel d'utilisateur télécharger pdf (Page 13)

Turn On the Perimeter With Delays

 I have this feature.

 I do not have this feature.

 This feature requires a passcode.

Command 3 is used to arm only the perimeter of your building, leaving the

interior disarmed. Once you enter Command 3, the exit delay time starts. You

now have a predetermined amount of time to leave before the perimeter arms.

Enter your personal passcode and press [ENT], to cancel Command 3.

Application

This arming command is useful in residential systems when you are leaving, but

members of your family, a baby-sitter, or a pet, are still inside the house.

In commercial installations, use this command to rearm your system when you

are on the premises, but not yet open for business.

COMMAND 3

Arming with Command 3:

1. Ensure all perimeter points are secure. Interior points are not

armed with this command and can remain faulted while arming

with Command 3. Perimeter point status lights should be off. If

not, refer to Force Arming the System on page 29.

2. Press the [COMMAND] bar. The Command mode indicator light

comes on.

3. Press the [3] key. The PERIMETER indicator light flashes, showing

the system has begun exit delay time. When the delay time

expires, the light remains steady.

4. To disarm your security system or cancel Command 3, enter your

personal passcode and press [ENT] before the delay time expires.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Pas de commentaire

Bosch D720 Manuel d'utilisateur Page 13