Bosch VIDEOJET X20 Manuel d'utilisateur Page 95

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 130
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 94
VideoJet X20 Operation | en 95
Bosch Security Systems Installation and Operating Manual DOC | V4.0 | 2009.06
6.2 The LIVEPAGE
Once the connection is established, the Web browser displays the LIVEPAGE. It shows the
live video image on the right of the browser window. Depending on the configuration, various
text overlays may be visible on the live video image (see Section 5.13 Advanced Mode: Display
Stamping, page 41).
Other information may be shown next to live video image on the LIVEPAGE. The display
depends on the settings on the LIVEPAGE Functions page (see Section 5.15 Advanced Mode:
LIVEPAGE Functions, page 44).
Maximum Number of Connections
If you do not connect, the unit may have reached its maximum number of connections.
Depending on the unit and network configuration, each VideoJet X20 can have up to 25 Web
browser connections or up to 50 connections via VIDOS or Bosch Video Management System.
Protected VideoJet X20
If the VideoJet X20 is password protected against unauthorized access, the Web browser
displays a corresponding message and prompts you to enter the password when you attempt
to access protected areas.
1. Enter the user name and associated password in the corresponding text fields.
2. Click OK. If the password is entered correctly, the Web browser displays the page that
was called up.
Protected Network
If a RADIUS server is employed in the network for managing access rights (802.1x
authentication), the VideoJet X20 must be configured accordingly, otherwise no
communication is possible (see Section Authentication, page 84).
Image Selection
You can view the image from each camera separately on a full screen. Alternatively, you can
display the camera images from both video inputs side by side (Dual Video).
1. Click one of the tabs above the video image to view one or both of the camera images.
2. Click one of the tabs Stream 1, Stream 2 or M-JPEG below the video image to toggle
between the different displays of the camera image. The selection applies to both camera
images.
i
NOTICE!
A VideoJet X20 offers the option to limit the extent of access using various authorization levels
(see Section 5.11 Advanced Mode: Password, page 39).
Vue de la page 94
1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 129 130

Commentaires sur ces manuels

Pas de commentaire