Bosch VIP X1600 Module Spécifications télécharger pdf (Page 9)

Bosch Security Systems | 2006-03 | V2.0 Safety information

VIP X1600 | Installation and Operating Manual EN | 9

Safety information 2

Electric shock hazard

❚ Never attempt to connect the VIP X1600 to any power network other than the

type for which it is intended.

❚ Only use power supply units approved by Bosch Security Systems.

❚ Never open the housing of the power supply unit.

❚ Always install a VIP X1600 module in the appropriate VIP X1600 base hous-

ing only.

❚ If a fault occurs, disconnect the VIP X1600 from the power supply and from

all other units.

❚ Install the VIP X1600 in a dry, weather-protected location.

❚ If safe operation of the unit cannot be ensured, remove it from service and

secure it to prevent unauthorized operation. Safe operation is no longer pos-

sible in the following cases,

– if there is visible damage to the unit or power cables,

– if the unit no longer operates correctly,

– if the unit has been exposed to rain or moisture,

– if foreign bodies have penetrated the unit,

– after long storage under adverse conditions, or

– after exposure to extreme stress in transit.

In such cases, have the unit checked by Bosch Security Systems.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 133 134

Pas de commentaire

Bosch VIP X1600 Module Spécifications Page 9