Bosch VIP X1600 Module Spécifications télécharger pdf (Page 86)

EN | 86 Installation and Operating Manual | VIP X1600

Configuration using a Web Browser Bosch Security Systems | 2006-03 | V2.0

Multicast audio port 1: to Multicast audio port 4:

As well as video data, the audio versions can also send and receive audio sig-

nals. The audio signals are sent in a separate data stream parallel to the video

data, which increases the network load. The audio data are encoded according

to G.711 and require an additional bandwidth of approx. 80 kBit/s per direction.

If you wish to transmit audio signals in multicast mode you must assign a dedi-

cated port as this is a separate data stream. Enter the port address of the

required stream here.

Note

Audio signals are only transmitted if the audio function has been activated

on the Audio settings page (see page 47).

Multicast packet TTL:

You can enter a value to specify how long the multicast data packets are active

on the network. This value must be greater than one if multicast is to be run via

a router.

Version information

The hardware and firmware version numbers are for information only and cannot

be changed. Keep a record of these numbers in case technical assistance is

required.

Hardware version:

The hardware version number of the VIP X1600 module is displayed.

Firmware version:

The firmware version number of the VIP X1600 module is displayed.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 133 134

Pas de commentaire

Bosch VIP X1600 Module Spécifications Page 86