Bosch MON170CL Manuel d'utilisateur télécharger pdf (Page 9)

Bosch Security Systems | 6 July 2005

MON170CL | Instruction Manual | Installation

5.4 Connecting the Y/C (S-video) Signal

to the Monitor

There is one (1) mini-DIN type connector for the

S-video (Y/C) input (see Figure 2 and Figure 3 below).

NNOOTTEE::

Both Y and C inputs are terminated with 75

1. GND

2. GND

3. Y-signal IN

4. C-signal IN

5.5 Connecting Audio to the Monitor

There is one (1) set of mini phone jack for the audio

connector (Figure 2 and Photo F).

Photo F

5.6 Connecting the Analog VGA Signal

to the Monitor

There is one (1) 15-pin D-sub connector (Figure 4) for one

analog VGA input. Refer to Figure 2, item B.

Figure 4: Analog VGA Connector

5.7 VESA Standard Mounting Hole (For

Wall-mount Use)

1. Carefully press the cover and remove it from the

stand. (as shown in photo G)

2. Unscrew the three holdings screws hidden under the

high cover before separating the stand from the panel.

(as shown in photo H)

3. The square mounting hole patterns are VESA standard

on 100 mm (3.9 centers, as shown in photo I).

Mount the unit to mounting device using the four

mounting holes on the rear panel.

Photo G

Photo H

Photo I

Figure 3: Y/C Connection Pinout

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Bosch MON170CL Manuel d'utilisateur Page 9