Bosch PDO 6 Instructions d'exploitation télécharger pdf (Page 14)

14 | English 1 609 929 K82 • 17.1.07

When the battery indication a in the display lights up, measuring is

possible for approx. 1 h when using alkali-manganese batteries (serv-

ice life is shorter with rechargeable batteries). When the battery indi-

cation a flashes, measuring is still possible for approx. 10 minutes.

When the battery indication a and the illuminated ring 1 (red) are

flashing, measuring is no longer possible and the battery or the

rechargeable battery respectively, must be replaced.

f If the measuring tool is not used for a long period of time,

the battery must be removed. The battery can corrode or dis-

charge itself over long periods.

Operation

Initial Operation

f Protect the measuring tool against moisture and direct

sun irradiation.

Switching On and Off

f Before switching the measuring tool on, make sure that

the sensor area 5 is not moist. If required, wipe the measur-

ing tool dry using a cloth.

f If the measuring tool was subject to an extreme temper-

ature change, allow it to adjust to the ambient tempera-

ture before switching on.

To switch on the measuring tool, press the On/Off switch 4.

After a brief self-check, the measuring tool is ready for operation.

The operational readiness is indicated by a check mark behind the

“AutoCal” calibration indicator d.

To switch the measuring tool off, press the “on/off” button 4.

When no measurements are carried out for approx. 10 minutes, the

measuring tool switches off automatically in order to extend the serv-

ice life of the batteries.

OBJ_BUCH-308-001.book Page 14 Wednesday, January 17, 2007 9:55 AM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 95 96

Pas de commentaire

Bosch PDO 6 Instructions d'exploitation Page 14