Bosch NTC-255-PI Manuel d'utilisateur télécharger pdf (Page 51)

IP Camera 200 Series Advanced Mode | en 51

Bosch Security Systems Installation and Operation Manual AR18-10-B012 | v1.5 | 2011.01

JPEG stream

Set the parmeters for the M-JPEG stream.

– Select the Max. frame rate in images per second (IPS).

–The Picture quality slider allows adjustment of the

M-JPEG image quality from Low to High.

Note:

The M-JPEG resolution follows the highest resolution setting of

either stream 1 or stream 2. For example, if stream 1 is VGA and

stream 2 is QVGA, the JPEG resolution will be VGA. The M-JPEG

frame rate varies depending on system loading.

6.4.4 Audio

Select the line-in connector as the Audio input or switch it off.

Adjust the Input volume with the slider.

Switch the Audio output On or Off.

Select G.711 or L16 as the audio Recording format. The default

value is G.711. Select L16 if you want better audio quality with

higher sampling rates. This requires approximately eight times

the G.711 bandwith.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 103 104

Pas de commentaire

Bosch NTC-255-PI Manuel d'utilisateur Page 51