Bosch NBN-733 Manuel d'installation télécharger pdf (Page 31)

DINION HD Camera configuration | en 31

Bosch Security Systems Installation Manual AM18-Q0614 | v1.0 | 2012.09

7 Camera configuration

The camera normally provides an optimal picture without the

need for further adjustments. Configuration of the camera is

carried out via the network using a web browser. The camera

has a set-up menu in which basic installation settings (lens

wizard, IP address) can be accessed. To view this menu,

connect a laptop to the network connection of the camera.

7.1 Reset button

Figure 7.1 Reset button

With the power on, use a small pointed object to press and hold

the reset button for more than 10 seconds to restore the

factory defaults. This is useful to restore the default IP address

or to restore a previous version of the firmware if uploading a

new version fails.

7.2 User modes

The camera has six user modes. These are selected via the web

browser interface. The default mode is Outdoor.

456456

123123

12VDC

INSTALL

24VAC

µSD

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 43 44

Pas de commentaire

Bosch NBN-733 Manuel d'installation Page 31