Bosch VideoJet 8008 Manuel d'utilisateur télécharger pdf (Page 52)

Installation and Operating Manual | VideoJet 8008

EN | 52

Configuration using a Web Browser Bosch Security Systems | 2005-06 | V2.0

Network settings

Here, you can specify network addresses and configure multiple connections.

Network

The settings on this page are used to integrate the unit into an existing network.

Warning!

Changes to the IP address, subnet mask or gateway address are

transferred to the unit by clicking Set. However, they only take effect after

the unit is restarted.

– Click Set after entering a new IP address.

– To do this, enter the old IP address followed by /reset (for instance

192.168.0.80/reset) in the address bar of your web browser. The

VideoJet 8008 will be restarted, after which it can only be accessed at the

new IP address.

IP address:

Enter the desired IP address for the VideoJet 8008 in this field. The IP address

must be valid for the network.

Subnet mask:

Enter the appropriate subnet mask for the set IP address here.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 135 136

Pas de commentaire

Bosch VideoJet 8008 Manuel d'utilisateur Page 52