Bosch Security System Guide de l'utilisateur télécharger pdf (Page 32)

System Test

I have this feature.

I do not have this feature.

This feature helps ensure your system is operating properly by testing the

system’s bell, battery, and phone line. If any of these components fails the

test, contact your security company for assistance. Be sure to contact your

security company before you begin.

1. Make sure the system is turned off (On light is off).

2. Press the [1] key. The display shows:

ENTER CODE TO

START TEST

3. Enter your passcode (Owner type required). If your passcode is

valid, the system test begins. The bell is the first component to be

tested. It should ring for approximately 3 seconds:

TESTING BELL

4. The next component to be tested is the battery. This test may take

up to 4 minutes:

TESTING BATTERY

MAY TAKE 4 MIN.

If the battery passes the test, the display shows:

BATTERY TEST

PASSED

If the battery test fails, the display shows:

BATTERY TEST

FAILED

5. Finally, the phone connection is tested. This test may take up to 10

minutes:

TESTING PHONE

MAY TAKE 10 MIN.

If the phone line passes the test, the display shows:

PHONE TEST

PASSED

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 47 48

Pas de commentaire

Bosch Security System Guide de l'utilisateur Page 32