Bosch K2200 Series Guide de l'utilisateur télécharger pdf (Page 50)

K2200 Series | User Guide | 6.0 Installer Commands EN | 50

Bosch Security Systems | 7/03 | 17376 v1.1 / 47491C

To program the door controller relays, select DR 4,

DR 8, DR 12, DR 16 for door controllers 1, 2, 3 and

4 respectively, provided no alarm modules are

installed on these channels.

1. Present an editor key to the faceplate reader.

2. Enter the password and press [ENT], if required.

3. You will now see the CMD prompt.

4. Type [R][E] and press [ENT].

CMD RE_

5. Door 1, Relay 1 Time Profile Number - Enter

a time profile number (1-128). When the time

profile is activated, the relay will activate; when

the time profile finishes, the relay will deactivate.

A time profile of 0 will remove any timed

activation.

DR 1 RLY 1 TP 0

Press the [ENT] key.

Press [NXT] to go to the next field.

6. Door 1, Relay 1 System Event - Enter a system

event (0-15) as shown in the table above.

DR 1 RLY 1 SYS 0

Press the [ENT] key.

Press [NXT] to go to the next relay.

There are a total of 4 relays, each with a time

profile and system event value.

Press [ESC] to return to the CMD prompt.

Examples

To have each door controller use its four on-board

relays to indicate Door Left Open for its own

individual doors:

1. Use the RE command and select the DR 4

record for door controller 1.

2. For RLY1 SYS enter a value of 4 and press

[ENT].

3. For RLY2 SYS enter a value of 5 and press

[ENT].

4. For RLY3 SYS enter a value of 6 and press

[ENT].

5. For RLY4 SYS enter a value of 7 and press

[ENT].

If door 2 is left open relay 2 will activate and stay

activated until the door is closed.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 61 62

Commentaires sur ces manuels

Pas de commentaire

Bosch K2200 Series Guide de l'utilisateur Page 50

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Bosch K2200 Series