Bosch DS7447 Guide de l'utilisateur télécharger pdf (Page 41)

– 41 –

Testing your System (continued)

Communicator Test

This test is available only if your system transmits alarms and system information to a monitoring service, and has been programmed by the

security installing company to permit communicator tests. This test can be performed from a Master Keypad. The account code for partition

#1 will be used. System Tests are not available from RF (wireless) keypads.

A long beep will initially sound to acknowledge the start of the test. If the test is successful, the sounder will again issue one long beep. If the

test fails, the keypad sounder will turn ON continuously. To silence the sounder, enter your [PIN] followed by the [#] key or press the [*] key.

Type of Test

Command

Sequence

What Will Happen What To Do

Communicator

Test

[PIN] + [#] [8] [2]

•

A long beep will sound.

•

A “Test” report is sent to

the monitoring service.

If the test fails, the keypad sounder will sound continuous

To silence the sounder, press [System Reset].

Note:

This test may take several minutes to complete

because the control pnael will try ten attempts

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

Pas de commentaire

Bosch DS7447 Guide de l'utilisateur Page 41