Bosch AutoDome700 Manuel d'utilisateur télécharger pdf (Page 14)

10 en | Analog Camera Firmware Updates via the CTFID

F.01U.097.269 | 4.0 | 2012.02 Firmware Update Manual Bosch Security Systems, Inc.

2.3.2 Launching with an RS232/RS485 Serial Connection

If using a RS232/RS485 serial connection, use the following instructions to launch the CTFID

software.

1. Double-click the CTFID icon on the Windows Desktop.

2. Click Cancel to select an alternate interface.

Figure 2.6 CTFID Detect Device Screen

3. Click the Select an alternate interface radio button and click Continue.

Figure 2.7 Alternate Interface dialog box

4. Ensure that the Serial radio button is selected.

5. Select the COM Port that is connected to the DB9 connector.

6. Accept the default baud rate.

Note: If unable to connect, make sure the AutoDome AutoBaud setting is turned on.

Figure 2.8 Select Interface dialog box

NOTICE! The VP-RS2BLNX device is not available in the United States.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Pas de commentaire

Bosch AutoDome700 Manuel d'utilisateur Page 14