Bosch CPA565GS0 Manuel d'instructions Page 19

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 48
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 18
Microwave en
19
Pausing the operation
1. Touch the start l stop field or open the appliance
door.
The operation is suspended and the
start l stop LED flashes.
2. Close the appliance door.
3. Touch the start l stop field.
The operation is continued and the start l stop LED
lights up.
Stopping the appliance from heating
Turn the function selector to the "Off" position.
The appliance will stop heating and all the settings will
be cleared.
Note: The fan may continue to run after the appliance
has been paused or stopped.
Setting the microwave to combined
operation
Setti ng the microwave to combi ned oper at i on
You can combine the microwave function with all types
of heating and the steam function. The appliance heats
up and the microwave is switched on at the same time.
As a result, the food is ready in a much shorter time.
Combination options
" Steam
< Hot air
( Grill
4 Hot air grill
Exceptions:
! Microwave setting, 1000 watts
< Hot air 40 °C
Setting combined operation
Example: Hot air < 190 ºC with microwave at 360 W,
17 minutes.
1. Use the function selector to set the Hot air <
function.
A default value for the temperature is displayed.
2. Turn the rotary selector to set the desired
temperature.
3. Touch the microwave power output field ! until the
required level is selected in the display.
A default cooking time appears.
4. Set the cooking time using the rotary selector.
5. Touch start l stop.
The operation starts and the start l stop LED lights
up. The cooking time starts counting down.
The cooking time has elapsed
A signal sounds and the start l stop symbol stops
lighting up. Combination mode has finished. Touch any
field to end the acoustic signal.
Changing the microwave power output
Touch ! until the required level is selected in the
display.
Notes
Touching it several times switches the power levels
from the highest to the lowest level.
If the microwave function is only added after the
start, the appliance pauses. Press start l stop to
start operation
Pausing the operation
1. Touch the start l stop field or open the appliance
door.
The operation is suspended and the
start l stop LED flashes.
2. Close the appliance door.
3. Touch the start l stop field.
The operation is continued and the start l stop LED
lights up.
Stopping the appliance from heating
Turn the function selector to the "Off" position.
The appliance will stop heating and all the settings will
be cleared.
Note: The fan may continue to run after the appliance
has been paused or stopped.
Drying the cooking compartment
Dry the cooking compartment after operation to ensure
that no moisture remains.
Heating up the cooking compartment
To dry, heat up the cooking compartment so that the
moisture in the cooking compartment evaporates. Then
open the appliance door to allow the steam to escape
from the cooking compartment.
1. Allow the appliance to cool down.
2. Remove the worst dirt from the cooking
compartment immediately and wipe away moisture
from the cooking compartment floor.
3. Use the function selector to select Hot air grill 4
4. Touch 0 twice.
The cooking time symbol y is highlighted in the
display.
5. Use the rotary selector to set a cooking time of 15
minutes.
6. Press start l stop to start the operation.
The drying function starts and ends automatically
after 15 minutes.
7. Open the appliance door and leave it open for 1 to 2
minutes so that the moisture in the cooking
compartment can escape.
Drying the cooking compartment by hand
1. Allow the appliance to cool down.
2. Remove any food remnants from the walls of the
cooking compartment.
3. Dry the cooking compartment with a sponge.
4. Leave the appliance door open for 1 hour so that the
cooking compartment dries completely.
Vue de la page 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 47 48

Commentaires sur ces manuels

Pas de commentaire