Bosch PKD645F17 Manuel d'instructions Page 11

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 16
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 10
11
Changing the basic settings
The hob must be switched off.
1. Switch on the hob.
2. Within the next 10 seconds, touch the 0 symbol for
4 seconds.
and flash alternately in the left-hand display and lights up
in the right-hand display.
3. Touch the 0 symbol repeatedly until the desired symbol
appears on the left-hand display.
4. Set the desired value on the settings range.
5. Touch the 0 symbol for 4 seconds.
The setting is activated.
Switching off
To exit the basic setting, switch off the hob with the main switch
and make new settings.
Cleaning and care
The information in this section provides help on how best to
care for your hob.
Suitable maintenance and cleaning products can be purchased
from the after-sales service or in our e-Shop.
Ceramic
Clean the hob after each use. This will prevent spills from
burning onto the ceramic.
Only clean the hob when it has cooled down sufficiently.
Use only cleaning agents which are suitable for glass ceramic.
Follow the cleaning instructions on the packaging.
Never use:
Undiluted washing-up liquid
Detergent intended for dishwashers
Scouring agents
Harsh cleaning agents such as oven spray or stain remover
Abrasive sponges
High-pressure cleaners or steam jet cleaners
Ground-in dirt can be best removed with a glass scraper,
available from retailers. Please note the manufacturer's
instructions.
You can also obtain a suitable glass scraper from our after-
sales service or from the e-Shop.
Using special sponges to clean glass ceramic achieves great
cleaning results.
™†
Automatic timer
Switched off.*
-ŠŠ Cooking time after which the hotplates switch off
™‡
Duration of the timer end signal
10 seconds.*
ƒn 30 seconds
1 minute.
™ˆ
Activation of the filament circuits
Switched off.
Switched on.
ƒ Last setting before the hotplate switched off.*
™Š
Time for selecting the hotplate
Unlimited: The last selected hotplate can always be adjusted without having to select it again.*
Once you select a hotplate, you have 10 seconds to adjust it, after which you will have to select it again in order to
be able to adjust it.
™‹
Reset the basic settings
Switched off.*
Switched on.
Display Function
*Basic setting
Vue de la page 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire