Bosch NGM8055UC Manuel d'utilisateur télécharger pdf (Page 7)

English 5

5. Insert each of the LP gas orifices provided with this kit

into the socket (using the small piece of foam tape to

assure a tight fit).

a) Check to be sure the small piece of foam tape used

earlier is fitted to wrap against one side of the

socket.

b) When pressing the socket driver onto the orifice,

the tape will help the orifice fit more snugly inside

the socket. This will help prevent the orifice from

falling out of the socket during insertion.

This will help prevent the orifice from falling out of the

socket during insertion.

Step 3 - Replace the Burner Caps and

Grates

Replace the grates and burner caps. Be sure the

grates are correctly placed and the rubber feet on the

grates engage the indents in the cooktop for proper

position.

Step 4 - Convert Valves for LP Gas

The bypass jet on each valve must be adjusted. Your

cooktop may come with either hollow or solid valve shafts.

Determine the bypass screw location accordingly.

1. Turn all knobs to the “Off” position.

2. Remove knobs.

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Pas de commentaire

Bosch NGM8055UC Manuel d'utilisateur Page 7