Bosch DIVAR AN 5000 Manuel d'utilisateur télécharger pdf (Page 44)

Edit a schedule

1. Select the required channel number (select “all” if you want to schedule all the channels).

2. If required, choose Pre record to start the video recording a few seconds before the

event occurred in the file (from 1 to 30 seconds depending on the bit stream).

3. If required, choose Snapshot to take a snapshot of the image when an alarm occurs (see

Encode, page 39 for more information on setting up the snapshot).

4. Choose Period - Monday to Sunday, or all (if the same period is required for each

weekday).

5. Enter the times required for different periods (maximum six) for different modes.

6. Assign the mode for each different time period - choose Regular, MD, Alarm and/or MD &

alarm.

7. If holiday(s) occur in the current week, choose Holiday:

– Set the specific holiday dates in menu General > Holiday > Setup.

– Repeat steps 4 to 6 to assign the holiday settings.

8. After completing the setup, click <OK> to save the settings and return to the previous

menu.

Pas de commentaire

Bosch DIVAR AN 5000 Manuel d'utilisateur Page 44