Safety
Electric shock hazard
– Never attempt to connect the unit to any power network other than the type for which it
is intended.
– Connect the unit to an earthed mains socket-outlet.
– Never open the housing.
– If a fault occurs, disconnect the unit from the power supply and from all other units.
– Install the unit only in a dry, weather-protected location.
– When installing in a switch cabinet, ensure that the unit has sufficient grounding.
– If safe operation of the unit cannot be ensured, remove it from service and secure it to
prevent unauthorized operation. In such cases, have the unit checked by Bosch Security
Systems.
Safe operation is no longer possible in the following cases:
– if there is visible damage to the unit or power cables,
– if the unit no longer operates correctly,
– if the unit has been exposed to rain or moisture,
– if foreign bodies have penetrated the unit,
– after long storage under adverse conditions, or
– after exposure to extreme stress in transit.
Viktige sikkerhetsinstruksjoner (Norway only)
Utstyr som er koplet til beskyttelsesjord via nettplugg og/eller via annet jordtilkoplet utstyr –
og er tilkoplet et kabel-TV nett, kan forårsake brannfare. For å unngå dette skal det ved
tilkopling av utstyret til kabel-TV nettet installeres en galvanisk isolator mellom utstyret og
kabel-TV nettet.
Viktiga säkerhetsinstruktioner (Sweden only)
Utrustning som är kopplad till skyddsjord via jordat vägguttag och/eller via annan utrustning
och samtidigt är kopplad till kabel-TV nät kan i vissa fall medfőra risk főr brand. Főr att undvika
detta skall vid anslutning av utrustningen till kabel-TVnät galvanisk isolator finnas mellan
utrustningen och kabel-TV nätet.
Installation and operation
– The relevant electrical engineering regulations and guidelines must be complied with at
all times during installation.
– Relevant knowledge of network technology is required to install the unit.
– Before installing or operating the unit, make sure you have read and understood the
documentation for the other equipment connected to it, such as cameras. The
documentation contains important safety instructions and information about permitted
uses.
– Perform only the installation and operation steps described in this manual. Any other
actions may lead to personal injury, damage to property or damage to the equipment.
Please ensure the following installation conditions:
– Do not install the unit close to heaters or other heat sources. Avoid locations exposed to
direct sunlight.
– Allow sufficient space for running cables.
– Ensure that the unit has adequate ventilation. Bear the total heat output in mind,
particularly when installing multiple units in a switch cabinet.
1
1.1
1.2
VIDEOJET multi 4000 Safety | en 5
Bosch Sicherheitssysteme GmbH Installation Manual 2014.02 | V1 | F.01U.298.750
(5 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels