Bosch SHE878WD5N Manuel d'installation télécharger pdf (Page 12)

Remove the hose clip at the back of the dishwasher as shown. The hose

clip may be used later to hold the drain hose inside your cabinet.

Electrical Preparation

WARNING

Avoid Electrical Shock Hazard

Do not work on an energized circuit. Doing so could result in serious

injury or death. Only qualied electricians should perform electrical

work. Do not attempt any work on the dishwasher electric supply

circuit until you are certain the circuit is de-energized.

To avoid possible injury or property damage, care should be exer-

cised when the dishwasher is installed or removed to reduce the

likelihood of damage to the power cord.

Avoid Fire Hazard

Make sure electrical work is properly installed. Only qualied

electricians should perform electrical work.

Make sure there are no loose electrical connections. Make sure all

electrical connections are properly made.

Electrical Supply

The customer has the responsibility of ensuring that the dishwasher

electrical installation is in compliance with all national and local electrical

codes and ordinances. The dishwasher is designed for an electrical sup-

ply of 120V, 60 Hz, AC, connected to a dishwasher-dedicated, properly

grounded electrical circuit with a fuse or breaker rated for 15 amps. Elec-

trical supply conductors shall be a minimum #14 AWG copper wire

rated at 75°C (167°F) or higher.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 95 96

Pas de commentaire

Bosch SHE878WD5N Manuel d'installation Page 12