Bosch FLEXIDOME IP micro 2000 Manuel d'utilisateur Page 66
- Page / 102
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
66 en | Alarm Camera Browser Interface
AM18-Q0635 | v5.8 | 2013.05 Software manual Bosch Security Systems
11 Alarm
11.1 Alarm Connections
In the event of an alarm, the camera can automatically connect
to a pre-defined IP address. The camera can contact up to ten
IP addresses in the order listed until a connection is
established.
11.1.1 Connect on alarm
Select On so that the camera automatically connects to a pre-
defined IP address in the event of an alarm. Select Follows
input 1 so that the device maintains the connection for as long
as an alarm exists.
11.1.2 Number of destination IP address
Specify the numbers of the IP addresses to be contacted in the
event of an alarm. The device contacts the remote locations one
after the other in the numbered sequence until a connection is
made.
11.1.3 Destination IP address
For each number, enter the corresponding IP address for the
desired remote station.
11.1.4 Destination password
If the remote station is password protected, enter the
password here.
Only ten passwords can be defined here. Define a general
password if more than ten connections are required, for
example, when connections are initiated by a controlling
system such as the Bosch Video Client or the Bosch Video
Management System. The camera connects to all remote
stations protected by the same general password. To define a
general password:
1. Select 10 in the Number of destination IP address list
box.
2. Enter 0.0.0.0 in the Destination IP address field.
- Camera Browser Interface 1
- Table of Contents 3
- 1 Browser connection 10
- 1.3 Protected network 11
- 2 System Overview 12
- 3 Operation via the browser 13
- 3.1.2 Status icons 14
- 3.1.4 View Control ROI 16
- 3.1.7 Saving snapshots 18
- 3.1.6 System Log / Event Log 18
- 3.1.10 Audio communication 19
- 3.1.11 Processor load 19
- 3.2 Playback page 20
- 3.2.2 Exporting tracks 21
- 3.2.3 Searching for tracks 21
- 3.2.4 Controlling playback 22
- 4 Settings Overview 24
- 4.2 Settings 25
- 5Basic Mode 26
- 5.2 Date/Time 28
- 5.3 Network 29
- 5.4 Encoder 30
- 5.5 Audio 30
- 5.6 Recording 30
- 5.7 System Overview 30
- 6 Advanced General Settings 31
- 6.2 Password 32
- 6.3 Date/Time 33
- 6.3.5 Time server IP address 34
- 6.3.6 Time server type 34
- 6.4 Display Stamping 35
- 6.4.5 Alarm message 36
- 6.4.6 Video watermarking 36
- 7 Web Interface 37
- 7.1.6 Show overlay icons 38
- 7.1.7 Select video player 38
- 7.2 LIVEPAGE Functions 39
- 7.2.6 Allow local recording 40
- 7.2.7 I-frames-only stream 40
- 7.3 Logging 41
- 8 Camera 42
- 8.2 Picture Settings 43
- 8.3 Enhance 44
- 8.4 Encoder Settings 45
- 8.5 Privacy Masks 46
- 8.6 Audio 46
- 8.7 Pixel Counter 46
- 9 Encoder Settings 47
- 9.1 Encoder Profile 48
- 9.1.9 Default 51
- 9.2 Encoder Streams 52
- 9.2.2 JPEG stream 53
- 9.3 Encoder Regions 54
- 10 Recording 55
- 10.1 Storage Management 56
- 10.2 Recording Profiles 60
- 10.2.2 Standard recording 61
- 10.3 Maximum Retention Time 62
- 10.4 Recording Scheduler 63
- 10.4.3 Profile names 64
- 10.4.4 Activate recording 64
- 10.4.5 Recording status 64
- 10.5 Recording Status 65
- 11 Alarm 66
- 11.1.5 Video transmission 67
- 11.1.6 Stream 67
- 11.1.7 Remote port 67
- 11.1.8 Video output 67
- 11.1.9 Decoder 67
- 11.1.10 SSL encryption 68
- 11.1.11 Auto-connect 68
- 11.1.12 Audio 68
- 11.3 Audio Alarm 70
- 11.4 Alarm E-Mail 71
- 11.4.8 Destination address 72
- 11.4.9 Sender address 72
- 11.4.10 Test e-mail 72
- 11.5 Alarm Task Editor 73
- 12 Setting up VCA 74
- 12.2 VCA - Profiles 75
- 12.2.3 Motion detector 76
- 12.2.4 Tamper detection 77
- 12.3 VCA - Scheduled 81
- 12.4 VCA - Event triggered 83
- 13 Network 84
- 13.1.3 IP V6 address 85
- 13.1.4 DNS server address 1 85
- 13.1.5 Video transmission 85
- 13.1.6 TCP rate control 85
- 13.1.7 HTTP browser port 85
- 13.1.8 HTTPS browser port 86
- 13.1.9 RCP+ port 1756 86
- 13.1.10 Telnet support 86
- 13.1.11 Interface mode ETH 86
- 13.1.12 Network MSS [Byte] 86
- 13.1.21 Status 88
- 13.2 Advanced 89
- 13.2.6 UPnP 90
- 13.2.7 TCP metadata input 90
- 13.2.8 Quality of service 90
- 13.2.5 RTSP port 90
- 13.2.9 Cloud-based services 91
- 13.3 Multicast 92
- 13.3.3 Port 93
- 13.3.4 Streaming 93
- 13.3.5 Multicast packet TTL 93
- 13.4 Image Posting 94
- 13.5 Accounts 95
- 13.6 IP V4 filter 96
- 14 Service 97
- 14.1.3 Configuration 98
- 14.1.4 SSL certificate 98
- 14.2 System Overview 99
- Bosch Security Systems 102
Produits connexes et manuels pour Caméras de sécurité Bosch FLEXIDOME IP micro 2000
Caméras de sécurité Bosch NBC-255-W Manuel
(20 pages)
(20 pages)
(54 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.304 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels