Bosch ISC-PDL1-WA18G Manuel d'utilisateur télécharger pdf (Page 5)

5.0 Setup

5.1 Walk Test

If Switch 1 is ON and no connections are made to

the WT terminal, the local Walk Test is always on. For

switch settings refer to Section 3.1 Switch 1 - Walk Test on

page 4.

To perform the Walk Test, walk across the detection

pattern.

If necessary, adjust the microwave range a minimal amount

until the required coverage is met.

�

 



5.2 Alarm Memory

If Switch 2 is ON and no connections are made to the

S/U terminal, the Alarm Memory is OFF. For switch set-

tings refer to Section 3.2 Switch 2 - Alarm Memory Polarity

on page 4.

Alarm memory ashes the alarm LED to indicate stored

alarms for use in multiple unit applications. A switched

voltage from the control panel controls the alarm memory.

The Alarm Memory function is used when more than one

detector is connected to an alarm loop. The Alarm Memory

identies the units experiencing an alarm in the last armed

period. The detector stores the alarm event in memory

during the armed period. It shows the stored alarm when

the system is disarmed. The LED ashes to indicate the

stored alarm. Alarm Memory clears when the system is re-

armed.

5.3 Trouble Memory

Pulsing the WT Terminals recalls the last trouble condition

from the memory. Refer to Section 4.0 LED Indicators on

page 4 for the trouble conditions.

When the memory is recalled, it clears automatically after

12 hours.

5.4 Short Range/Long Range

For switch settings refer to Section 3.3 Switch 3 - Short

Range/Long Range on page 4. If Switch 3 is in the ON

position the coverage pattern is 25 ft x 32 ft (8 m x 10 m). If

Switch 3 is in the OFF position the coverage pattern is 60 ft

x 80 ft (18 m x 24 m).







 



 





 























    





















    

 















1 2 3 4 5 6

Commentaires sur ces manuels

Pas de commentaire

Bosch ISC-PDL1-WA18G Manuel d'utilisateur Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Bosch ISC-PDL1-WA18G