Bosch IXO Professional Manuel de service télécharger pdf (Page 16)

English | 31

Bosch Power Tools 2 609 005 792 | (25.10.11)

Operation

Starting Operation

Reversing the Rotational Direction

The rotational direction switch 9 is used to reverse the rotational direction

of the machine. However, this is not possible with the On/Off switch 8 ac-

tuated.

Right rotation: For driving in screws, push the rotational direction switch

9 left to the stop.

The indicator for right rotation 4 lights up when the On/Off

switch 8 is actuated and the motor is running.

Left Rotation: For loosening or unscrewing screws, push the rotational

direction switch 9 right to the stop.

The indicator for left rotation 6 lights up when the On/Off switch

8 is actuated and the motor is running.

Switching On and Off

To start the machine, press the On/Off switch 8 and keep it pressed.

The power light 10 lights up when the On/Off switch 8 is slightly or com-

pletely pressed, and allows the work area to be illuminated when lighting

conditions are insufficient.

To switch off the machine, release the On/Off switch 8.

Fully automatic spindle locking (Auto-lock)

The drill spindle is locked when the On/Off switch 8 is not pressed.

This enables screws to be screwed in, even when the battery is empty and

allows for the machine to be used as a screwdriver.

f When the drilling spindle is locked, do not press the On/Off switch

8 for more than 15 seconds. Otherwise the power tool can be dam-

aged.

Working Advice

f Apply the power tool to the screw only when it is switched off. Ro-

tating tool inserts can slip off.

Up to 13 screwdriver bits can be stored on the side of the battery charger

12. The fixture that holds the screwdriver bits can be removed.

OBJ_BUCH-826-006.book Page 31 Tuesday, October 25, 2011 2:37 PM

1 2 ... 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Bosch IXO Professional Manuel de service Page 16