Bosch IntuiKey Manuel d'utilisateur télécharger pdf (Page 33)

IntuiKey Keyboard Controlling System4 Video Multiplexers | en 29

Bosch Security System, Inc. User Manual F.01U.127.291 | 1.93 | 2009.03

Select Cameo Segment

When in Multi or Quad Mode, the screen area where a camera is displayed is called a cameo.

Press the Cameo softkey to enter the cameo selection mode. In this mode, joystick is used to

select which cameo window will be under control of the keyboard. Entering a number into the

keyboard while in this mode will cause the camera to appear in the currently selected cameo

window. Cameras may be assigned to any selected cameo, and may be changed as often as

required. The Intuikey’s numeric entry field title will change to Cameo while the DVR is in this

Mode. Press the Cameo softkey again to exit the mode.

Sequence

Runs a previously programmed camera sequence.

Toggle VCR Test Mode

Enables/disables the multiplexer’s VCR test mode. When in VCR test mode, the IntuiKey

status display shows the VCR icon.

Record

Activates VCR record mode and displays the REC indicator in the IntuiKey status display.

Press the softkey again to disable the record mode.

Play

Activates VCR play mode and displays the PLAY indicator in the IntuiKey status display. Press

the softkey again to disable the play mode.

Zoom

Enlarges the active camera display. Selection of any other camera displays that camera in full

screen enlarged mode. Press the Zoom softkey to show the following submenu for control of

the zoom function.

Figure 4.3 MUX Zoom Menu

Different levels of the zoom function (e.g. x2, x4) may be available depending on the

multiplexer model.

Freeze

Holds the selected camera picture on either full screen or cameo. The currently selected

camera image freezes, and FREEZE is displayed on the monitor screen. Press FREEZE again to

release the freeze mode. Freeze a different camera image by selecting another camera with

the camera keys and pressing FREEZE again. Changing the display screen mode releases the

freeze mode from all cameos.

NOTICE! The multiplexer function of Assigning All Cameras is provided by an additional

softkey on the MUX Main Control menu. Press this key to activate this function.

Exit

^ Up

Right >< Left

v Down

Zoom

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 49 50

Pas de commentaire

Bosch IntuiKey Manuel d'utilisateur Page 33