Bosch SPS40C12GB Spécifications télécharger pdf (Page 8)

en

8

As soon as the rinse-aid refill indicator X

is lit on the fascia, there is still a rinse-aid

reserve of 1 – 2 rinsing processes. Refill

with rinse aid.

The rinse aid is required for stain-free

utensils and clear glasses. Use only rinse

aid for domestic dishwashers.

Combined detergents with rinse-aid

component may be used up to a water

hardness of 21° dH (37° fH, 26° Clarke,

3.7 mmol/l) only. If the water hardness is

over 21° dH, rinse aid must be used.

– Open the dispenser 1j by pressing

and lifting the plate on the cover.

– Carefully pour rinse aid up to the max.

mark in the filler opening.

– Close cover until it clicks shut.

– To prevent excessive foam formation

during the next rinse cycle, remove any

rinse aid which has run over with a

cloth.

Setting amount of rinse aid

The amount of rinse aid dispensed can be

set in 4 stages. Accordingly 0, 1, 2 or 3

displays are lit (see water hardness table).

Factory setting: 2.

Do not change the amount of rinse aid

unless streaks (select lower

setting) or water stains (select higher

setting) are left on the utensils.

– Close the door.

–SwitchonON/OFF switch(.

The Cleaning display )* flashes.

– Press and hold down the START

button @.

– Rotate programme selector 8 until

the rinse aid refill indicator X flashes.

– Release button.

The rinse aid refill indicator X flashes

and the displays )" and h are lit

(= Setting 2).

To change the setting:

– Rotate programme selector 8 until

the required setting has been selected.

– Press START button @.

The rinse-aid refill indicator X goes

out. The selected setting is saved.

Switching off rinse-aid refill

indicator

If the rinse-aid refill indicator X is

impaired (e.g. when using combined

detergents containing rinse-aid

component), it can be switched off.

– Proceed as described under “Setting

amount of rinse aid” and select

setting 0.

The rinse aid refill indicator X is now

switched off.

Rinse aid %





PD[

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Commentaires sur ces manuels

Pas de commentaire