Bosch DESAXL Manuel d'instructions télécharger pdf (Page 20)

Bosch Security Systems | November 17, 2004

DÉSA

| Instruction Manual | System Setup Options

8.3 Hardware Setup Tab

8.3.1 Camera Setup

8.3.1.1 Use the Camera Setup section of the

Hardware Setup tab to Enable (Disable)

cameras connected to the system. Check

the box to enable camera input; uncheck

the box to disable camera input.

NOTE: Unchecking the box for a camera also disables

that camera in the Screen Division tab, and in the External Monitor section of the Hardware Setup tab. Re-enabling

the camera DOES NOT automatically re-enable these settings. The settings need to be manually restored.

8.3.1.2 Cam. ID enables logical numbering of every camera in the system; typically used when multiple

DÉSA

comprise a large system. Cam. ID directly relates to AutoDomes connected to the DÉSA

system for control. The Cam. ID must match the address of the connected AutoDome.

8.3.1.3 Name allows a camera description to be associated with each camera. Character length is limited to

13 uppercase characters or 14 lowercase characters.

8.3.1.4 Sensor associates the physical sensors (alarm inputs) to a specific camera. Multiple sensors can be

associated with multiple cameras by separating the sensor numbers by commas i.e. 1,2,3, etc.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 75 76

Pas de commentaire

Bosch DESAXL Manuel d'instructions Page 20