[en] Instructions for installation and useExtractor hood
10Checking the wall The wall must be level, vertical and adequately load-bearing. The depth of the bore holes must be the same length as the screws.
11Finishing installation of the appliance1. Drill an 8 mm Ø hole to a depth of 80 mm for the safety screw and press the wall plug flush into the wall.
920612*9000773694*9000773694Robert Bosch Hausgeräte GmbHCarl-Wery-Straße 3481739 MünchenGermanywww.bosch-home.com
2Ú Table of contents[en] Instructions for installation and useINSTRUCTION MANUAL... 2Importan
3Room air-dependent heat-producing appliances (e.g. gas, oil, wood or coal-operated heaters, continuous flow heaters or water heaters) obtain combusti
4Risk of electric shock! A defective appliance may cause electric shock. Never switch on a defective appliance. Unplug the appliance from the mains or
5Operating the applianceThese instructions apply to several appliance variants. It is possible that individual features are described which do not app
6Cleaning the metal mesh grease filters: Risk of fire!Grease deposits in the grease filter may catch fire.Clean the grease filter at least every 2 mon
7Replacing bulbs: Risk of electric shock!When changing the bulbs, the bulb socket contacts are live. Before changing the bulb, unplug the appliance fr
8INSTALLATION INSTRUCTIONSIns talla tion in struc tions This appliance is installed on the wall. Follow the enclosed installation instructions for a
9Safe operation is possible only when the partial vacuum in the place where the heat-producing appliance is installed does not exceed 4 Pa (0.04 mbar)
Commentaires sur ces manuels