Bosch TES50129RW Manuel d'utilisateur télécharger pdf (Page 19)

15

TCA52 7/2009

en

Reset: Switch the appliance to “eco”

mode and remove trays 17 and 18. Press

and hold the dispensing buttons 5 and

K simultaneously for at least 5 seconds.

The LEDs 7a, b, c and d (H, I, S, J)

17 and

18 and press the button eco to switch the

appliance on again.

Preparing hot water

The appliance must be ready for use.

This function allows water to be heated for

a cup of tea, for example.



!

Risk of burns

The nozzle gets very hot. Do not touch the

metal parts.



nozzle 8.

8 all the

way down.

6 to g/h.



!

Risk of scalding

When the dial is set to g/h, the nozzle

may sputter a little. Do not touch the nozzle

8 or point it at anyone.

6

back to “O”.

Important:

For safety reasons it is not possible to

dispense hot water when the appliance is in

“eco” mode. First press the eco button and

then dispense hot water.

Steam for foaming milk

The appliance must be ready for use. You



on top, or foam the milk separately and

pour it into the coffee.



!

Risk of burns

The nozzle gets very hot. Do not touch the

metal parts.

8 all the

way down.



h. The LED will



i The appliance will heat up for approx.

20 seconds.

8 deep into the milk,

but do not let it touch the bottom of the

cup.

J

dial 6 to g/h.



!

Risk of scalding

When the dial 6 is set to g/h, the nozzle

8 may sputter. Escaping steam is very hot

and may cause liquids to sputter. Do not

touch the nozzle 8 or point it at anyone.



foamed.

6

back to “O”.

i To foam more milk, press the steam

button h again and repeat the whole

process.

Note: When the nozzle 8 has cooled

down, clean it immediately. Dried residue is



Tip: If possible, use cold low-fat (1,5% fat)

milk.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 99 100

Commentaires sur ces manuels

Pas de commentaire